|
6.2绝缘耐压 Input To Output输入/输出 3000Vac 50Hz 1minute ≤5mA Input To Case输入/壳 3000Vac 50Hz 1minute ≤5mA Output To Case输出/壳 Non Isolated
在输入端对输出端及输入端对外壳间施加了3KV电压,并且测试中施加在绝缘上的电压是在1s内由0V逐渐上升到规定值,然后保持60s电流灵敏度设置在10mA。经过以上测试,电源应不发生电气及机械上的异常。
When AC voltage of 3.0KV is applied, and the voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage in 1s,and held at that value for 60s between the input and output and between the input and housing, the current sensitivity shall be less than 10mA. After this test, the adapter shall exhibit no electrical and mechanical abnormalities.
6.3漏电流LEAKAGE CURRENT 当电源供应器操作在***输入及***负载情况下,其漏电流应小于0.75mA,满足Class II等级。The leakage current shall be less than0.75mAforclass IIwhen power supply is operated maximum input voltage and maximum load.
6.4安全标准(SAFETY STANDARD) 已通过CE认证。
7电磁兼容性(EMC-SPECIFICATION) 7.1 电磁干扰(EMI) The power supply shall compliance with the following Criterion:
1) 传导干扰度(Conduction Emission):
*EN55015, CLASS B
2)辐射干扰度(Radiated Emission ):
*EN55015, CLASS B
*7.2 电磁抗扰(EMS) The power supply shall compliance with the following Criterion:
1)静电抗扰度(ESD)
*EN61000-4-2 8KV ,CRITERIA B
2)脉冲群抗扰度(EFT)
*EN61000-4-4 2KV
3)雷击浪涌(Surge)
*EN61000-4-5 1.0KV / 2KV
4)谐波(Surge)
*EN61000-3-2 <15% 8.机械规格(MECHANICAL SPECIFICATIONS) 8.1物理尺寸(Dimension) * 315mm X 18mm X 12mm (L* W * H ).
8.2 Weight重量 电源的重量大约为 *域名隐藏* weight of the power supply shall be about50g.
8.3线材(WIRE)
8.3.1输入AC线(AC CARD)
电子线材,具体待定。
8.3.2输出DC线(DC CARD)
电子线材white、black两种接线端子,white表示电源正极输出,black表示电源负极输出。
规格: |
GBL-0 |
数量: |
|
包装: |
日期: |
2010-04-27 |
|
|