167.net必赢(中国)官方网站·App Store

⑴ 缸体直径：Φ600mm,Φ900mm,Φ1100mm;
⑵ 面纸、瓦楞纸采用Φ 900 mm热缸。
⑵ 选用两条导纸辊，其中一条为固定、另一条可在热缸外围游动，调整范围 60 0至 220 0。热缸经抛光处理加工。
⑶ 导纸辊工作表面经磨削加工，并电镀。
⑷ 热缸固定不转。
⑸ 采用国际先进的节能型蝶型封头结构，使纸板预热充分、热效能利用率高。
⑹ 蒸汽压力为 1.1 至 1.2 Mpa。
⑺ 采用金属软管代替虹吸管，解决了虹吸管容易脱落及角度不好控制的问题，使排水更为彻底，有效的提高缸体温度和车速。
⑻ 各辊疏水系统采用独立疏水，集中回水，取消止回阀、截止阀等旁路设计，合理的回路安装和简便化维护。
(1) cylinder diameter: Φ 600 mm, 900 mm Φ, Φ 1100 mm;
Glossy paper, corrugated paper [2] the Φ 900 mm hot cylinder.
Choose two paper guide roller, one is fixed, the other can swim in hot cylinder periphery, adjust the range of 0 to 220 0. Hot cylinder processing after polishing processing.
(3) the paper guide roller working surface grinding, and electroplating.
(4) the hot cylinder fixed did not turn.
5] adopting international advanced energy-saving butterfly head structure, the board preheat fully, high heat utilization efficiency.
[6] steam pressure of 1.1 to 1.2 Mpa.
Once the metal hose instead of siphon, solve the siphon is easy to fall off and bad Angle control problems, make the drainage more thoroughly, effectively improve the cylinder body temperature and speed.
Being the roller hydrophobic system USES independent hydrophobic, concentrated backwater, cancel the check valve, stop valve, such as bypass design, reasonable circuit installation and easy maintenance.